MANUAL FOR FIXED TEMPERATURE HEAT DETECTOR
PRODUCT INTRODUCTION
This heat detector offers fixed temperature detection, suitable to any household or commercial applications. The detector is made up of an externally mounted thermistor with a specially designed cover that protects the thermistor while allowing maximum air flow. The thermistor reads the temperature from the air it takes in and transmits a signal representing the temperature to the control IC. If the temperature reaches or exceeds the trip point, the detector is triggered. The status LED lights in red and alarm signal output. The detector is an ideal unit to detect rapid fire developments in houses, shops, hotels, restaurants, offices, schools, banks, libraries and etc.
PRODUCT FEATURE
STRONG ADAPT ABILITY FOR CIRCUMSTANCE
SMT ADOPTED, HIGH STABILITY
LOW STANDBY CURRENT
9-35VDC WIDE VOLTAGE
POWER SUPPLY NON-POLARIZED INPUT
FLASHING LED POWER INDICATOR
ALARM RELAY N.C./N.O.OPTIONAL (4 WIRE)
REMOTE LED INDICATOR OUTPUT (2 WIRE)
TECHNICAL SPECIFICATION
PRODUCT CATEGORY
2 WIRE 4 WIRE
OPERATING VOLTAGE
DC 9V~35V
STANDBY CURRENT
50uA 50uA
ALARM CURRENT
20-25 mA @12V
40-50 mA @24V
30-35mA
ALARM INDICATION
RED LED ON
TEMPERATURE RANGE
-10°C~+50°C, Humidity≤95%RH
TEMP.TRIP POINT
57°C (135°F)
DETECTING RANGE
50 m² at 6-12m Installation Height
ALARM OUTPUT
REMOTE LED RELAY OUTPUT
CONTACT RATING
N/A 0.5A@DC28V
STANDARD
EN54-5, UL521, GB4716-2005
DIMENSION
98.5mm diameter*43
.5mm deep
